N2X2Y, NA2X2Y

Energy Cables with XLPE Insulation and PE Sheath

HRN HD 603 S1 type 5G

IEC 60 502-1 (Cu/XLPE/PE, Al/XLPE/PE)

DIN VDE 0276 T 603

*Old designation: XE 00, XE 00-A

Structure of the Cable

  1. Conductor: Cu stranded (N2X2Y), Al stranded (NA2X2Y)
  2. Insulation: XLPE material
  3. Filler: Injected elastomeric or plastic mixture or wrapped thermoplastic tape
  4. Sheath: PE material

Application Area
For installation in the ground, ducts, on supports, in dry and damp rooms, etc., where mechanical damage is not expected, and the cables are not exposed to mechanical tensile stress.
In urban networks, industrial plants, power stations, and other electrical installations for increased current and thermal loads (operating temperature of the conductor up to 90°C).
For the needs of the MTK management system in distribution networks, an additional insulated conductor of 2.5 mm² is installed in the center between the conductors for four-core cables of larger cross-sections.

Technical Data

  • Nominal voltage: 1 kV
  • Test voltage: 4 kV
  • Standards: HRN HD 603 S1 type 5G, DIN VDE 0276 T 603, IEC 60 502-1

Related products

PP 44, PP 44-A

Energy Signal Cables with PVC Insulation and PVC Sheath, Armored with Round Steel Wires

IEC 60502-1 (Cu/PVC/SWA/PVC, Al/PVC/SWA/PVC)

BS 6346

PP 41, PP 41-A

Energy Signal Cables with PVC Insulation and Sheath, Armored with 2 Steel Strips

HRN HD 603 S1 type 4C (VAV, LVAV)

IEC 60502-1 (Cu/PVC/STA/PVC, Al/PVC/STA/PVC)

XP 44, XP 44-A

Power cables with XLPE insulation and PVC sheath, armored with round steel wires

IEC 60 502-1 (Cu/XLPE/SWA/PVC, Al/XLPE/SWA/PVC)

BS 5467

C2XY, CA2XY

Energy cables with XLPE insulation and PVC sheath

Standards: IEC 60 502-1 (Cu/XLPE/PVC, Al/XLPE/PVC, C2XY, CA2XY)


ISO 9001

ISO 14001

ISO 45001

ISO 50001

VDE

Left arrow
Right arrow