XP 41, XP 41-A

Energy signal cables with XLPE insulation and PVC sheath, armored with two steel tapes

IEC 60 502-1 (Cu/XLPE/STA/PVC, Al/XLPE/STA/PVC)

Cable Structure:

  1. Conductor: Cu wire (XP 41), Al wire (XP 41-A)
  2. Insulation: XLPE material
  3. Filler: Injected elastomeric or plastomeric compound, or wrapped thermoplastic tapes
  4. Armor: Two (2) steel tapes
  5. Sheath: PVC material

Application: Suitable for installation in the ground, ducts, on racks, in dry and wet rooms, etc., where mechanical damage is expected, but cables are not subjected to high tensile mechanical stress. Used in urban networks, industrial plants, power plants, and other electrical installations for increased current and thermal loads (conductor operating temperature up to 90°C). For MTK system management needs in distribution networks, an additional insulated conductor of 2.5 mm² is placed in the center between the conductors for larger cross-section four-core cables.

Technical Data:

  • Rated voltage: 1 kV
  • Test voltage: 3.5 kV
  • Standards: IEC 60 502-1

Related products

N2XY, NA2XY

Energy Cables with XLPE Insulation and PVC Sheath

HRN HD 603 S1 type: 5G
IEC 60 502-1: (Cu/XLPE/PVC, Al/XLPE/PVC)
DIN VDE 0276 T 603
Old designation: XP 00, XP 00-A

PP 44, PP 44-A

Energy Signal Cables with PVC Insulation and PVC Sheath, Armored with Round Steel Wires

IEC 60502-1 (Cu/PVC/SWA/PVC, Al/PVC/SWA/PVC)

BS 6346

NYCY

Energy Signal Cables with Insulation and PVC Sheath, with Concentric Neutral and Protective Conductor

HRN HD 603 S1 type 3G1

IEC 60502-1 (Cu/PVC/CC/PVC)

DIN VDE 0276 T 603

Old designation: PP 40

N2X2Y, NA2X2Y

Energy Cables with XLPE Insulation and PE Sheath

HRN HD 603 S1 type 5G

IEC 60 502-1 (Cu/XLPE/PE, Al/XLPE/PE)

DIN VDE 0276 T 603

*Old designation: XE 00, XE 00-A


ISO 9001

ISO 14001

ISO 45001

ISO 50001

VDE

Left arrow
Right arrow