Welding cables acc. to ISE standard

ISE ELKA

1-conductor: fine-wired, copper rope
2-separator:polyester foil
3-sheath: elastomere plastomere compound

*Sheath Colour: acc. to table
Cable of normal flexibility grade, used as high voltage insulated conductor from electrical welding machine to electrodes, i.e. as earth connection. In addition to hand welding, it can be also applied in automobile industry, shipbuilding, transport systems, production lines, tool manufacturing, welding robots. These cables retain their high flexibility also under the influence of ozone, light, oxygen, protective gases, oils and gasoline. Due to their robust construction, they are also resistant to cold, same as to heat and fire. Suitable for outdoor use, but also in dry and damp conditions.
nominal voltage:100 kV
test voltage: 1kV
standards: ISE ELKA

Sheath mark:
ZP/S "S" mm2 200 V ELKA HR
ZP/S
Nazivni presjek Promjer vodiča Debljina izolacije Boja plašta Vanjski promjer El. otpor Trajna struja Masa kabela Duljina Bubanj
Cross-section Cond.Diam. Insul. thickness Sheath colour Extern.Diam. El. Resistance Permament current Cable Weight Length Drum
(nxmm2) (mm) (mm) (mm) (Ohm/km) (A) (kg/km) (m)
16 5,6 2,0 crna/black 9,9 1,16 135 215 1000 BD-8
25 6,5 2,0 plava/blue 11,1 0,758 180 298 1000 BD-8
35 7,8 2,0 narančasta/orange 12,4 0,536 225 408 1000 BD-9
50 9,5 2,2 zelena/green 14,3 0,379 285 568 1000 BD-10
70 11,0 2,4 žuta/yellow 16,2 0,268 355 773 1000 BD-10
95 13,4 2,6 siva/gray 19,0 0,198 430 1063 1000 BD-12
120 14,8 2,8 crna/black 20,8 0,155 500 1313 1000 BD-12
150 16,5 3,0 plava/blue 22,9 0,125 580 1613 1000 BD-14
185 18,2 3,2 crna/black 25,0 0,102 660 1990 500 BD-14
link to individual catalogue