Power cables with XLPE insulation and PE sheath

HRN HD 603 S1 tip 5G

IEC 60 502-1 (Cu/XLPE/PE, Al/XLPE/PE)

DIN VDE 0276 T 603

*stara oznaka:  XE 00, XE 00-A

1-conductor: Cu rope (N2XY), Al rope (NA2XY)
2-insulation: XLE compound
3-filling: extruded elastomer or plastomer compound or wrapped thermoplastic tapes
4-sheath: PE compound
In earth, ducts, on support brackets, in dry and wet conditions etc, where one does not expect mechanical damages and cables arent exposed to the mechanical tensile.
In urban networks, industrial plants, electric power plants and other electricity consumers for increased electricity and thermic strains. (operating temp. of conductor up to 90°C)
For the necessity of MTK control systems in distribution networks, at four-core cables of larger cross-section, an additional insulated conductor of 2.5mm2is applied in the middle among the cable cores.
nominal voltage:1 kV
test voltage: 4 kV
standards: HRN HD 603 S1 tip 5G, DIN VDE 0276 T 603, IEC 60 502-1
N2XY, NA2XY
Cross Section (n x mm2) Insul. Thickness (mm) Sheath Thickness (mm) Overall Diam. (mm) Weight N2XY (kg/km) Weight NA2XY (kg/km) Length (m) Drum (tip)
2x16 0,7 1,8 17,6 625 425 1000 BD-12
2x25 0,9 1,8 21,0 925 615 1000 BD-12
2x35 0,9 1,8 23,2 1190 760 1000 BD-14
3x16 0,7 1,8 18,6 780 475 1000 BD-12
3x25 0,9 1,8 22,2 1070 600 1000 BD-14
3x35 0,9 1,8 24,6 1535 865 1000 BD-14
4x16 0,7 1,8 20,4 980 575 1000 BD-12
4x25 0,9 1,8 24,3 1490 865 1000 BD-14
4x35 0,9 1,9 28,2 2015 1155 1000 BD-16
4x50 1,0 1,9 28,2 2165 975 1000 BD-16
4x70 1,1 2,0 32,2 3030 1285 500 BD-14
4x95 1,1 2,1 36,4 3965 1655 500 BD-14
4x120 1,2 2,2 39,1 5060 2130 500 BD-16
4x150 1,4 2,4 45,1 6115 2545 500 BD-18
4x185 1,6 2,5 49,4 8005 3485 500 BD-20
4x240 1,7 2,7 54,0 9950 4110 500 BD-20
4x300 1,8 2,9 59,4 12865 5250 500 BD-20
download PDF