Welding cables according to BS standards

BS 6360, BS 6899

1-conductor: fine-wired copper rope
2-separator:polyester foil
3-sheath: nitryl-butadiene based rubber compound (NBR)

*Sheath Colour: acc. to table
Cable of normal flexibility grade, used as high voltage insulated conductor from electrical welding machine to electrodes, i.e. as earth connection. In addition to hand welding, it can be also applied in automobile industry, shipbuilding, transport systems, production lines, tool manufacturing, welding robots. These cables retain their high flexibility also under the influence of ozone, light, oxygen, protective gases, oils and gasoline. Due to their robust construction, they are also resistant to cold, same as to heat and fire. Suitable for outdoor use, but also in dry and damp conditions.
nominal voltage:100 kV
test voltage: 1kV
standards: VDE 0295 for conductor, BS 6899 for isolation

Sheath mark:
ELNAC "S" mm2 200 V ELKA HR
ELNAC
Nazivni presjek Promjer vodiča Debljina izolacije Boja plašta Vanjski promjer El. otpor Trajna struja Masa kabela Duljina Kolut
Cross-section Cond.Diam. Insul. thickness Sheath colour Extern.Diam. El. Resistance Permament current Cable Weight Length Coil
(nxmm2) (mm) (mm) (mm) (Ohm/km) (A) (kg/km) (m)
16 5,6 2,0 crna/black 9,9 1,16 135 220 100 K-315
25 6,5 2,0 plava/blue 11,1 0,758 180 315 100 K-315
35 7,8 2,0 narančasta/orange 12,4 0,536 225 425 100 K-315
50 9,5 2,2 zelena/green 14,3 0,379 285 580 100 K-315
70 11,0 2,4 žuta/yellow 16,2 0,268 355 785 100 K-315
95 13,4 2,6 siva/gray 19,0 0,198 430 1060 50 K-315
120 14,8 2,8 crna/black 20,8 0,155 500 1330 50 K-315
*number along K coil denotes inside diameter of coil (mm)
link to individual catalogue